The Coil Master DIY Kit v3 is the answer to all your rebuilding needs.
This build kit comes equipped with all the necessary tools to make rebuilding or re-wicking your atomizers as easy as possible. Whether you’re changing cotton out in your rebuildable dripper (RDA) or putting new coils in your rebuildable tank (RTA), this kit has what you need to complete the task as efficiently as possible. There is something to be said for having all your tools organized and in one place!
The DIY Kit V3 has improved upon the v2 kit most noticeably with a greatly improved 521 Mini v2. Operated by a single 18650 battery, this device both reads the resistance of your coils and fires them. This allows you to work out any hot spots on your coils and make that install as perfect as possible without ever having to thread the atomizer on to your mod. The Coil Master DIY Kit v3 also includes a coil jig with 6 metal dowels that vary in diameter. The coil jig makes building simple coils extremely easy. The 6 dowels that come with the build kit also aid in installing coils by allowing to keep their diameter consistent even when positioning and moving them in the build deck.
When installing coils, it is almost always important to pulse the coils, pushing a reasonable amount of power through them to get them to heat up evenly.
The DIY Kit v3 comes with some ceramic tipped tweezers which can contact the coils during pulsing without damaging the coils. Metal tweezers would arc and essentially weld the coils to the tweezers, hence why the ceramic coils are super handy to have. The metal tweezers included in the DIY Kit v3 are primarily for the re-wicking aspect of DIY coils, their fine needle tips allowing you to pull and push cotton through all kinds of coils and atomizers. Otherwise the Coil Master DIY kit v3 contains the obligatory pliers, flush cut snips, and two screwdrivers (flathead and Phillip’s), a handy t-tool, a 10 foot spool of 24 gauge kanthal, and some Japanese organic cotton.
Note: It is extremely important to have a basic understanding of Ohm’s Law when working with rebuildable devices.
In the box you will receive:
- Diagonal pliers
- Needle-nose pliers
- Stainless steel folding scissors
- Pen styled Phillips screwdriver
- Pen styled Flathead screwdriver
- Ceramic Tweezer (T1)
- Elbow Tweezer (T3) (With Rubber Caps for protection)
- 10 ft 24 GA Kanthal A1 Wire
- 521 Mini V2
- Coiling Kit V4
- Silicon rubber case for jigs
- T styled HEX screwdriver (1.25mm, 1.5mm, 2.0mm)
- 3 x Japanese Organic Cotton