Voopoo Drag S 60W Mod Pod

Product Code: 16639

Availability:In stock

$45.00 45.00

Available Options

Qty

The Drag S by Voopoo is the next generation of pod based systems.

The Drag S has a built-in 2500mAh battery.

This device is compatible with all Voopoo PNP coils.

Combining the simplicity and convenience of a pod system with the versatility and performance of a conventional tank/mod setup, the Drag S is an excellent device.



Voopoo uses the GENE.TT chipset in this device. This provides an easy-to-use user interface, exceptional efficiency, and all of the built-in protections we've come to expect from regulated devices.

The Drag S features an adjustable airflow ring. Adjustment is done via the small protrusion on the front of the device. Sliding it left and right closes/opens the airflow. This allows the user to really dial in their vape experience on this device. This adjustable airflow coupled with the adjustable wattage on the Drag S allows the device to suit a very wide array of vaping preferences.

The level of airflow restriction on this device makes it more of a direct to lung (DTL) device, but it still performs reasonably well as a mouth to lung (MTL) device.

The Drag S has 2 modes:

Smart Mode: in this mode the device will restrict the wattage of the device to what the it thinks the optimal wattage range would be. This is a great mode for beginners, as you won't be able to run your coil at an excessively low or high wattage setting.

RBA Mode: in this mode the device does not restrict wattage. Make sure you are aware of the optimal wattage range of the coil that you are using if you use your device in RBA mode.

The pod/tank section of the device is secured with surprisingly strong magnets. The pod/tank has no side-to-side movement, and takes a reasonable amount of effort to remove. Filling the tank and changing the coils are both done from the bottom of the tank. The coils press/slide in to place. The fill port is a good-sized silicone plug, wide enough to support filling from all bottle types.

Device Specifications:

Dimensions: 33mm x 28mm x 87mm
Output Power: 5watts to 60watts
Output Voltage: 3.2V to 4.2V
Battery Type: Internal (built-in) 2500mAh
Charging Type: USB C
Materials: Leather, Zinc-alloy, PCTG
Resistance Range: 0.1ohm to 3.0ohm

In the box:

1 Voopoo Drag S Device
1 Voopoo Drag S Pod
1 Voopoo PnP-VM1 0.3ohm Coil
1 Voopoo PnP-VM5 0.2ohm Coil
1 Warranty Card
1 Type C USB cable
1 User Manual

Built-in Protections:

Overtime Protection
Short-circuit Protection
Overcharge Protection
Max Power Protection
Output Over-current Protection
Over Discharge Protection
Over-temperature Protection
Reverse Polarity Protection

Customer Reviews

Based on 1 review Write a review