The Drag X by Voopoo is the next generation of pod based systems.
The Drag X requires an 18650 battery (sold separately).
Combining the simplicity and convenience of a pod system with the versatility and performance of a conventional tank/mod setup, the Drag X is an excellent device.
Voopoo uses the GENE.TT chipset in this device. This provides an easy-to-use user interface, exceptional efficiency, and of the built-in protections we've come to expect from regulated devices.
The Drag X features an adjustable airflow ring. Adjustment is done via the small protrusion on the front of the device. Sliding it left and right closes/opens the airflow. This allows the user to really dial in their vape experience on this device. This adjustable airflow coupled with the adjustable wattage featured on this device allow the Drag X to suit a very wide array of vaping preferences.
The level of airflow restriction on this device makes it more of a direct to lung (DTL) device, but it still performs reasonably well as a mouth to lung (MTL) device as well.
The Drag X has 2 modes:
Smart Mode: in this mode the device will restrict the wattage of the device to what the device thinks the optimal wattage range would be. This is a great mode for beginners, as you won't be able to run your coil excessively low or high.
RBA Mode: in this mode the device does not restrict wattage. Make sure you are aware of the optimal wattage range of the coil that you are using if you use your device in RBA mode.
The pod/tank section of the device is secured with surprisingly strong magnets. The pod/tank has no side-to-side movement, and takes a reasonable amount of effort to remove. Filling the tank and changing the coils are both done from the bottom of the tank. The coils press/slide in to place. The fill port is a good-sized silicone plug, wide enough to support filling from all bottle types.
Dimensions: 32.5mm x 28mm x 85mm
Output Power: 5watts to 80watts
Output Voltage: 3.2V to 4.2V
Battery Type: Single 18650 (sold separately)
Charging Type: USB C or External Battery Charger
Materials: Leather, Zinc-alloy, PCTG
Resistance Range: 0.1ohm to 3.0ohm
In the box:
1 Voopoo Drag X Device
1 Voopoo Drag X Pod
1 Voopoo PnP-VM1 0.3ohm Coil
1 Voopoo PnP-VM6 0.15ohm coil
1 Warranty Card
1 Type C USB cable
1 User Manual
Max Power Protection
Output Over-current Protection
Over Discharge Protection
Reverse Polarity Protection